Wide Input voltage range: 110-300 VAC, Selectable output voltage: 208-240VAC
PF: ≥ 0.99, Backup time: 10 minutes
Three-Phase, LCD display, Tower
Unit utama
Keunggulan Produk
LCD with Power Flow display and simultaneous Input and Output Voltage Measurement display
Settable Input Bypass by User from LCD
Green ECO mode operation for energy saving (Efficiency 97%)
Control panel LCD status display with Power Flow Meter : load and battery bar- graphs and On line : On Battery : Replace Battery : Overload indicators : Input & Output Voltage meter
True online double - convension
Input power factor correction 0,99
50 Hz/60Hz frequency coverter mode
Emergency power off function (EPO)
Generator compatible
Smart battery charger design for optimized battery performance
Wide Input Voltage range (110-300 VAC)
Bigger wattage output power
Programmable power management outlets (Settable backup period outlets)
Charger capacity expansion for long backup time.
- Selectable output voltage : 208-240VAC
- Manual bypass/load on main mode function
- Standard smart LCD display & USB interface
- Built-in isolation transformer (Complete common mode noise rejection)
Spesifikasi
Daya Keluar
11500VA/8000W
Form Factor
Tower
Baterai
Type: 12 V / 9 Ah
Recharge Time: 9 hours recover to 90% capacity
Voltase Masuk
Wide input voltage range: 110-300VAC
Phase: 3 or 1 Phase in / 1 phase out
Voltage tolerance: 176 VAC - 300 VAC
Frequency: 46 Hz - 54 Hz or 56 Hz - 64 Hz
THDI: < 6% @100@ load
Power Factor: ≥ 0.99 @100% load
Berat Produk
144 Kg
Antarmuka / Interface
SNMP + USB + RS-232 multiple communications
Back-Up Time Full Load
10 minutes
Dimensi Produk
59.2 x 25 x 82.6 cm
Voltase Keluar
Voltage: 208 / 220 / 230 / 240 VAC
Voltage Regulation: ± 1%
Frequency (Battery Mode): 50 Hz ± 0.1 Hz or 60 Hz ± 0.1 Hz
Current Crest Ratio 3 : 1
Harmonic Distortion: ≤ 2% (THD) Linear Load; ≤ 6% THD (Non - Linear Load)
Efficiency: 91.5% / >96%
Lain-lain
True online double conversion
Input phase flexibility : 3 Phase or Single Phase
Smart LCD with Power Flow display and Simultaneous Input / Output Voltage Measurement Display
UPS Status display (On Line/On Batter/Replace Battery/Overload indicators, Loas & Battery Levels)
DSP Technology guaratees high performance
Bigger Wattage Output power factor
Active Input power factor correction 0.99 in all phases
Green ECO mode operation for energy saving (Efficiency 96%)
Programmable power management outlets (Setteable backup period outlets)
Emergency power off function (EPO)
Charger capacity expansion for long-run models
3-stage extendable charging design for optimized battery performance
Optional N+X parallel redudancy
Settable Input Bypass Voltage Range and Enable/Disable Manual bypass by user from LCD
Maintenance bypass available
Tidak Termasuk Kabel Panel Input / Output
Operating Humidity: 0-95% RH @ 0-400 C (non-condensing)