B-SAVE NodeMCU v3 Lolin Lua WiFi ESP8266 CH340

3336871393

Produk ini tidak memiliki kombinasi valid.

Aksesoris sensor, Stand alone wifi development board yg memudahkan kita dalam mempelajari dan mengembangkan project Internet of Things (IoT)

Uses CH340G instead of CP2102, Transfer rate: 110-460800bps

Built-in TCP/IP protocol stack to support multiple TCP Client connections (5 MAX)

Wireless 802.11 b/g/n standard, WiFi at 2.4GHz, support WPA / WPA2 security mode

Power input: 4.5V ~ 9V (10VMAX), USB-powered

Unit Utama

Fitur	Uses CH340G instead of CP2102. NodeMCU has built-in USB-TTL serial with super reliable industrial strength CH340G for superior stability on all supported platforms. Drive Type: Dual high-power H-bridge driver
Dimensi Produk	12 x 16 x 4 cm
Berat Produk	0.2 kg
Lain-lain	Communication interface voltage: 3.3V. Antenna type: Built-in PCB antenna is available. Wireless 802.11 b/g/n standard WiFi at 2.4GHz, support WPA / WPA2 security mode Support STA/AP/STA AP three operating modes Built-in TCP/IP protocol stack to support multiple TCP Client connections (5 MAX) D0 ~ D8, SD1 ~ SD3: used as GPIO, PWM, IIC, etc., port driver capability 15mA AD0: 1 channel ADC Power input: 4.5V ~ 9V (10VMAX), USB-powered Current: continuous transmission: 70mA (200mA MAX), Standby: 200uA Transfer rate: 110-460800bps Support UART / GPIO data communication interface Remote firmware upgrade (OTA) Support Smart Link Smart Networking Working temperature: -40 ~ 125 Flash size: 4MByte